Getting started

Kubernetes v1.16 documentation is no longer actively maintained. The version you are currently viewing is a static snapshot. For up-to-date documentation, see the latest version.

Edit This Page

Creating a single control-plane cluster with kubeadm

kubeadm helps you bootstrap a minimum viable Kubernetes cluster that conforms to best practices. With kubeadm, your cluster should pass Kubernetes Conformance tests. Kubeadm also supports other cluster lifecycle functions, such as upgrades, downgrade, and managing bootstrap tokens.

Because you can install kubeadm on various types of machine (e.g. laptop, server, Raspberry Pi, etc.), it’s well suited for integration with provisioning systems such as Terraform or Ansible.

kubeadm’s simplicity means it can serve a wide range of use cases:

  • New users can start with kubeadm to try Kubernetes out for the first time.
  • Users familiar with Kubernetes can spin up clusters with kubeadm and test their applications.
  • Larger projects can include kubeadm as a building block in a more complex system that can also include other installer tools.

kubeadm is designed to be a simple way for new users to start trying Kubernetes out, possibly for the first time, a way for existing users to test their application on and stitch together a cluster easily, and also to be a building block in other ecosystem and/or installer tool with a larger scope.

You can install kubeadm very easily on operating systems that support installing deb or rpm packages. The responsible SIG for kubeadm, SIG Cluster Lifecycle, provides these packages pre-built for you, but you may also build them from source for other OSes.

kubeadm maturity

kubeadm’s overall feature state is GA. Some sub-features, like the configuration file API are still under active development. The implementation of creating the cluster may change slightly as the tool evolves, but the overall implementation should be pretty stable. Any commands under kubeadm alpha are by definition, supported on an alpha level.

Support timeframes

Kubernetes releases are generally supported for nine months, and during that period a patch release may be issued from the release branch if a severe bug or security issue is found. Here are the latest Kubernetes releases and the support timeframe; which also applies to kubeadm.

Kubernetes version Release month End-of-life-month
v1.13.x December 2018 September 2019  
v1.14.x March 2019 December 2019  
v1.15.x June 2019 March 2020  
v1.16.x September 2019 June 2020  

Before you begin

  • One or more machines running a deb/rpm-compatible OS, for example Ubuntu or CentOS
  • 2 GB or more of RAM per machine. Any less leaves little room for your apps.
  • 2 CPUs or more on the control-plane node
  • Full network connectivity among all machines in the cluster. A public or private network is fine.

Objectives

  • Install a single control-plane Kubernetes cluster or high-availability cluster
  • Install a Pod network on the cluster so that your Pods can talk to each other

Instructions

Installing kubeadm on your hosts

See “Installing kubeadm”.

Note:

If you have already installed kubeadm, run apt-get update && apt-get upgrade or yum update to get the latest version of kubeadm.

When you upgrade, the kubelet restarts every few seconds as it waits in a crashloop for kubeadm to tell it what to do. This crashloop is expected and normal. After you initialize your control-plane, the kubelet runs normally.

Initializing your control-plane node

The control-plane node is the machine where the control plane components run, including etcd (the cluster database) and the API server (which the kubectl CLI communicates with).

  1. (Recommended) If you have plans to upgrade this single control-plane kubeadm cluster to high availability you should specify the --control-plane-endpoint to set the shared endpoint for all control-plane nodes. Such an endpoint can be either a DNS name or an IP address of a load-balancer.
  2. Choose a pod network add-on, and verify whether it requires any arguments to be passed to kubeadm initialization. Depending on which third-party provider you choose, you might need to set the --pod-network-cidr to a provider-specific value. See Installing a pod network add-on.
  3. (Optional) Since version 1.14, kubeadm will try to detect the container runtime on Linux by using a list of well known domain socket paths. To use different container runtime or if there are more than one installed on the provisioned node, specify the --cri-socket argument to kubeadm init. See Installing runtime.
  4. (Optional) Unless otherwise specified, kubeadm uses the network interface associated with the default gateway to set the advertise address for this particular control-plane node’s API server. To use a different network interface, specify the --apiserver-advertise-address=<ip-address> argument to kubeadm init. To deploy an IPv6 Kubernetes cluster using IPv6 addressing, you must specify an IPv6 address, for example --apiserver-advertise-address=fd00::101
  5. (Optional) Run kubeadm config images pull prior to kubeadm init to verify connectivity to gcr.io registries.

To initialize the control-plane node run:

kubeadm init <args>

Considerations about apiserver-advertise-address and ControlPlaneEndpoint

While --apiserver-advertise-address can be used to set the advertise address for this particular control-plane node’s API server, --control-plane-endpoint can be used to set the shared endpoint for all control-plane nodes.

--control-plane-endpoint allows IP addresses but also DNS names that can map to IP addresses. Please contact your network administrator to evaluate possible solutions with respect to such mapping.

Here is an example mapping:

192.168.0.102 cluster-endpoint

Where 192.168.0.102 is the IP address of this node and cluster-endpoint is a custom DNS name that maps to this IP. This will allow you to pass --control-plane-endpoint=cluster-endpoint to kubeadm init and pass the same DNS name to kubeadm join. Later you can modify cluster-endpoint to point to the address of your load-balancer in an high availability scenario.

Turning a single control plane cluster created without --control-plane-endpoint into a highly available cluster is not supported by kubeadm.

More information

For more information about kubeadm init arguments, see the kubeadm reference guide.

For a complete list of configuration options, see the configuration file documentation.

To customize control plane components, including optional IPv6 assignment to liveness probe for control plane components and etcd server, provide extra arguments to each component as documented in custom arguments.

To run kubeadm init again, you must first tear down the cluster.

If you join a node with a different architecture to your cluster, make sure that your deployed DaemonSets have container image support for this architecture.

kubeadm init first runs a series of prechecks to ensure that the machine is ready to run Kubernetes. These prechecks expose warnings and exit on errors. kubeadm init then downloads and installs the cluster control plane components. This may take several minutes. The output should look like:

[init] Using Kubernetes version: vX.Y.Z
[preflight] Running pre-flight checks
[preflight] Pulling images required for setting up a Kubernetes cluster
[preflight] This might take a minute or two, depending on the speed of your internet connection
[preflight] You can also perform this action in beforehand using 'kubeadm config images pull'
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Activating the kubelet service
[certs] Using certificateDir folder "/etc/kubernetes/pki"
[certs] Generating "etcd/ca" certificate and key
[certs] Generating "etcd/server" certificate and key
[certs] etcd/server serving cert is signed for DNS names [kubeadm-cp localhost] and IPs [10.138.0.4 127.0.0.1 ::1]
[certs] Generating "etcd/healthcheck-client" certificate and key
[certs] Generating "etcd/peer" certificate and key
[certs] etcd/peer serving cert is signed for DNS names [kubeadm-cp localhost] and IPs [10.138.0.4 127.0.0.1 ::1]
[certs] Generating "apiserver-etcd-client" certificate and key
[certs] Generating "ca" certificate and key
[certs] Generating "apiserver" certificate and key
[certs] apiserver serving cert is signed for DNS names [kubeadm-cp kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 10.138.0.4]
[certs] Generating "apiserver-kubelet-client" certificate and key
[certs] Generating "front-proxy-ca" certificate and key
[certs] Generating "front-proxy-client" certificate and key
[certs] Generating "sa" key and public key
[kubeconfig] Using kubeconfig folder "/etc/kubernetes"
[kubeconfig] Writing "admin.conf" kubeconfig file
[kubeconfig] Writing "kubelet.conf" kubeconfig file
[kubeconfig] Writing "controller-manager.conf" kubeconfig file
[kubeconfig] Writing "scheduler.conf" kubeconfig file
[control-plane] Using manifest folder "/etc/kubernetes/manifests"
[control-plane] Creating static Pod manifest for "kube-apiserver"
[control-plane] Creating static Pod manifest for "kube-controller-manager"
[control-plane] Creating static Pod manifest for "kube-scheduler"
[etcd] Creating static Pod manifest for local etcd in "/etc/kubernetes/manifests"
[wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory "/etc/kubernetes/manifests". This can take up to 4m0s
[apiclient] All control plane components are healthy after 31.501735 seconds
[uploadconfig] storing the configuration used in ConfigMap "kubeadm-config" in the "kube-system" Namespace
[kubelet] Creating a ConfigMap "kubelet-config-X.Y" in namespace kube-system with the configuration for the kubelets in the cluster
[patchnode] Uploading the CRI Socket information "/var/run/dockershim.sock" to the Node API object "kubeadm-cp" as an annotation
[mark-control-plane] Marking the node kubeadm-cp as control-plane by adding the label "node-role.kubernetes.io/master=''"
[mark-control-plane] Marking the node kubeadm-cp as control-plane by adding the taints [node-role.kubernetes.io/master:NoSchedule]
[bootstrap-token] Using token: <token>
[bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles
[bootstraptoken] configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials
[bootstraptoken] configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token
[bootstraptoken] configured RBAC rules to allow certificate rotation for all node client certificates in the cluster
[bootstraptoken] creating the "cluster-info" ConfigMap in the "kube-public" namespace
[addons] Applied essential addon: CoreDNS
[addons] Applied essential addon: kube-proxy

Your Kubernetes control-plane has initialized successfully!

To start using your cluster, you need to run the following as a regular user:

  mkdir -p $HOME/.kube
  sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
  sudo chown $(id -u):$(id -g) $HOME/.kube/config

You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
  /docs/concepts/cluster-administration/addons/

You can now join any number of machines by running the following on each node
as root:

  kubeadm join <control-plane-host>:<control-plane-port> --token <token> --discovery-token-ca-cert-hash sha256:<hash>

To make kubectl work for your non-root user, run these commands, which are also part of the kubeadm init output:

mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config

Alternatively, if you are the root user, you can run:

export KUBECONFIG=/etc/kubernetes/admin.conf

Make a record of the kubeadm join command that kubeadm init outputs. You need this command to join nodes to your cluster.

The token is used for mutual authentication between the control-plane node and the joining nodes. The token included here is secret. Keep it safe, because anyone with this token can add authenticated nodes to your cluster. These tokens can be listed, created, and deleted with the kubeadm token command. See the kubeadm reference guide.

Installing a pod network add-on

Caution: This section contains important information about installation and deployment order. Read it carefully before proceeding.

You must install a pod network add-on so that your pods can communicate with each other.

The network must be deployed before any applications. Also, CoreDNS will not start up before a network is installed. kubeadm only supports Container Network Interface (CNI) based networks (and does not support kubenet).

Several projects provide Kubernetes pod networks using CNI, some of which also support Network Policy. See the add-ons page for a complete list of available network add-ons. - IPv6 support was added in CNI v0.6.0. - CNI bridge and local-ipam are the only supported IPv6 network plugins in Kubernetes version 1.9.

Note that kubeadm sets up a more secure cluster by default and enforces use of RBAC. Make sure that your network manifest supports RBAC.

Also, beware, that your Pod network must not overlap with any of the host networks as this can cause issues. If you find a collision between your network plugin’s preferred Pod network and some of your host networks, you should think of a suitable CIDR replacement and use that during kubeadm init with --pod-network-cidr and as a replacement in your network plugin’s YAML.

You can install a pod network add-on with the following command on the control-plane node or a node that has the kubeconfig credentials:

kubectl apply -f <add-on.yaml>

You can install only one pod network per cluster.

Please select one of the tabs to see installation instructions for the respective third-party Pod Network Provider.

AWS VPC CNI provides native AWS VPC networking to Kubernetes clusters.

For installation, please refer to the AWS VPC CNI setup guide.

For more information about using Calico, see Quickstart for Calico on Kubernetes, Installing Calico for policy and networking, and other related resources.

For Calico to work correctly, you need to pass --pod-network-cidr=192.168.0.0/16 to kubeadm init or update the calico.yml file to match your Pod network. Note that Calico works on amd64, arm64, and ppc64le only.

kubectl apply -f https://docs.projectcalico.org/v3.8/manifests/calico.yaml

Canal uses Calico for policy and Flannel for networking. Refer to the Calico documentation for the official getting started guide.

For Canal to work correctly, --pod-network-cidr=10.244.0.0/16 has to be passed to kubeadm init. Note that Canal works on amd64 only.

kubectl apply -f https://docs.projectcalico.org/v3.8/manifests/canal.yaml

For more information about using Cilium with Kubernetes, see Kubernetes Install guide for Cilium.

For Cilium to work correctly, you must pass --pod-network-cidr=10.217.0.0/16 to kubeadm init.

These commands will deploy Cilium with its own etcd managed by etcd operator.

Note: If you are running kubeadm in a single node please untaint it so that etcd-operator pods can be scheduled in the control-plane node.

kubectl taint nodes <node-name> node-role.kubernetes.io/master:NoSchedule-

To deploy Cilium you just need to run:

kubectl create -f https://raw.githubusercontent.com/cilium/cilium/v1.5/examples/kubernetes/1.14/cilium.yaml

Once all Cilium pods are marked as READY, you start using your cluster.

kubectl get pods -n kube-system --selector=k8s-app=cilium

The output is similar to this:

NAME           READY   STATUS    RESTARTS   AGE
cilium-drxkl   1/1     Running   0          18m

Contiv-VPP employs a programmable CNF vSwitch based on FD.io VPP, offering feature-rich & high-performance cloud-native networking and services.

It implements k8s services and network policies in the user space (on VPP).

Please refer to this installation guide: Contiv-VPP Manual Installation

For flannel to work correctly, you must pass --pod-network-cidr=10.244.0.0/16 to kubeadm init.

Set /proc/sys/net/bridge/bridge-nf-call-iptables to 1 by running sysctl net.bridge.bridge-nf-call-iptables=1 to pass bridged IPv4 traffic to iptables’ chains. This is a requirement for some CNI plugins to work, for more information please see here.

Make sure that your firewall rules allow UDP ports 8285 and 8472 traffic for all hosts participating in the overlay network. see here .

Note that flannel works on amd64, arm, arm64, ppc64le and s390x under Linux. Windows (amd64) is claimed as supported in v0.11.0 but the usage is undocumented.

kubectl apply -f https://raw.githubusercontent.com/coreos/flannel/2140ac876ef134e0ed5af15c65e414cf26827915/Documentation/kube-flannel.yml

For more information about flannel, see the CoreOS flannel repository on GitHub .

Provides overlay SDN solution, delivering multicloud networking, hybrid cloud networking, simultaneous overlay-underlay support, network policy enforcement, network isolation, service chaining and flexible load balancing.

There are multiple, flexible ways to install JuniperContrail/TungstenFabric CNI.

Kindly refer to this quickstart: TungstenFabric

Set /proc/sys/net/bridge/bridge-nf-call-iptables to 1 by running sysctl net.bridge.bridge-nf-call-iptables=1 to pass bridged IPv4 traffic to iptables’ chains. This is a requirement for some CNI plugins to work, for more information please see here.

Kube-router relies on kube-controller-manager to allocate pod CIDR for the nodes. Therefore, use kubeadm init with the --pod-network-cidr flag.

Kube-router provides pod networking, network policy, and high-performing IP Virtual Server(IPVS)/Linux Virtual Server(LVS) based service proxy.

For information on setting up Kubernetes cluster with Kube-router using kubeadm, please see official setup guide.

Set /proc/sys/net/bridge/bridge-nf-call-iptables to 1 by running sysctl net.bridge.bridge-nf-call-iptables=1 to pass bridged IPv4 traffic to iptables’ chains. This is a requirement for some CNI plugins to work, for more information please see here.

The official Romana set-up guide is here.

Romana works on amd64 only.

kubectl apply -f https://raw.githubusercontent.com/romana/romana/master/containerize/specs/romana-kubeadm.yml

Set /proc/sys/net/bridge/bridge-nf-call-iptables to 1 by running sysctl net.bridge.bridge-nf-call-iptables=1 to pass bridged IPv4 traffic to iptables’ chains. This is a requirement for some CNI plugins to work, for more information please see here.

The official Weave Net set-up guide is here.

Weave Net works on amd64, arm, arm64 and ppc64le without any extra action required. Weave Net sets hairpin mode by default. This allows Pods to access themselves via their Service IP address if they don’t know their PodIP.

kubectl apply -f "https://cloud.weave.works/k8s/net?k8s-version=$(kubectl version | base64 | tr -d '\n')"

Once a pod network has been installed, you can confirm that it is working by checking that the CoreDNS pod is Running in the output of kubectl get pods --all-namespaces. And once the CoreDNS pod is up and running, you can continue by joining your nodes.

If your network is not working or CoreDNS is not in the Running state, checkout our troubleshooting docs.

Control plane node isolation

By default, your cluster will not schedule pods on the control-plane node for security reasons. If you want to be able to schedule pods on the control-plane node, e.g. for a single-machine Kubernetes cluster for development, run:

kubectl taint nodes --all node-role.kubernetes.io/master-

With output looking something like:

node "test-01" untainted
taint "node-role.kubernetes.io/master:" not found
taint "node-role.kubernetes.io/master:" not found

This will remove the node-role.kubernetes.io/master taint from any nodes that have it, including the control-plane node, meaning that the scheduler will then be able to schedule pods everywhere.

Joining your nodes

The nodes are where your workloads (containers and pods, etc) run. To add new nodes to your cluster do the following for each machine:

  • SSH to the machine
  • Become root (e.g. sudo su -)
  • Run the command that was output by kubeadm init. For example:

    kubeadm join --token <token> <control-plane-host>:<control-plane-port> --discovery-token-ca-cert-hash sha256:<hash>

If you do not have the token, you can get it by running the following command on the control-plane node:

kubeadm token list

The output is similar to this:

TOKEN                    TTL  EXPIRES              USAGES           DESCRIPTION            EXTRA GROUPS
8ewj1p.9r9hcjoqgajrj4gi  23h  2018-06-12T02:51:28Z authentication,  The default bootstrap  system:
                                                   signing          token generated by     bootstrappers:
                                                                    'kubeadm init'.        kubeadm:
                                                                                           default-node-token

By default, tokens expire after 24 hours. If you are joining a node to the cluster after the current token has expired, you can create a new token by running the following command on the control-plane node:

kubeadm token create

The output is similar to this:

5didvk.d09sbcov8ph2amjw

If you don’t have the value of --discovery-token-ca-cert-hash, you can get it by running the following command chain on the control-plane node:

openssl x509 -pubkey -in /etc/kubernetes/pki/ca.crt | openssl rsa -pubin -outform der 2>/dev/null | \
   openssl dgst -sha256 -hex | sed 's/^.* //'

The output is similar to this:

8cb2de97839780a412b93877f8507ad6c94f73add17d5d7058e91741c9d5ec78
Note: To specify an IPv6 tuple for <control-plane-host>:<control-plane-ip>, IPv6 address must be enclosed in square brackets, for example: [fd00::101]:2073.

The output should look something like:

[preflight] Running pre-flight checks

... (log output of join workflow) ...

Node join complete:
* Certificate signing request sent to control-plane and response
  received.
* Kubelet informed of new secure connection details.

Run 'kubectl get nodes' on control-plane to see this machine join.

A few seconds later, you should notice this node in the output from kubectl get nodes when run on the control-plane node.

(Optional) Controlling your cluster from machines other than the control-plane node

In order to get a kubectl on some other computer (e.g. laptop) to talk to your cluster, you need to copy the administrator kubeconfig file from your control-plane node to your workstation like this:

scp root@<control-plane-host>:/etc/kubernetes/admin.conf .
kubectl --kubeconfig ./admin.conf get nodes
Note:

The example above assumes SSH access is enabled for root. If that is not the case, you can copy the admin.conf file to be accessible by some other user and scp using that other user instead.

The admin.conf file gives the user superuser privileges over the cluster. This file should be used sparingly. For normal users, it’s recommended to generate an unique credential to which you whitelist privileges. You can do this with the kubeadm alpha kubeconfig user --client-name <CN> command. That command will print out a KubeConfig file to STDOUT which you should save to a file and distribute to your user. After that, whitelist privileges by using kubectl create (cluster)rolebinding.

(Optional) Proxying API Server to localhost

If you want to connect to the API Server from outside the cluster you can use kubectl proxy:

scp root@<control-plane-host>:/etc/kubernetes/admin.conf .
kubectl --kubeconfig ./admin.conf proxy

You can now access the API Server locally at http://localhost:8001/api/v1

Tear down

To undo what kubeadm did, you should first drain the node and make sure that the node is empty before shutting it down.

Talking to the control-plane node with the appropriate credentials, run:

kubectl drain <node name> --delete-local-data --force --ignore-daemonsets
kubectl delete node <node name>

Then, on the node being removed, reset all kubeadm installed state:

kubeadm reset

The reset process does not reset or clean up iptables rules or IPVS tables. If you wish to reset iptables, you must do so manually:

iptables -F && iptables -t nat -F && iptables -t mangle -F && iptables -X

If you want to reset the IPVS tables, you must run the following command:

ipvsadm -C

If you wish to start over simply run kubeadm init or kubeadm join with the appropriate arguments.

More options and information about the kubeadm reset command.

Maintaining a cluster

Instructions for maintaining kubeadm clusters (e.g. upgrades,downgrades, etc.) can be found here.

Explore other add-ons

See the list of add-ons to explore other add-ons, including tools for logging, monitoring, network policy, visualization & control of your Kubernetes cluster.

What’s next

Feedback

Version skew policy

The kubeadm CLI tool of version vX.Y may deploy clusters with a control plane of version vX.Y or vX.(Y-1). kubeadm CLI vX.Y can also upgrade an existing kubeadm-created cluster of version vX.(Y-1).

Due to that we can’t see into the future, kubeadm CLI vX.Y may or may not be able to deploy vX.(Y+1) clusters.

Example: kubeadm v1.8 can deploy both v1.7 and v1.8 clusters and upgrade v1.7 kubeadm-created clusters to v1.8.

These resources provide more information on supported version skew between kubelets and the control plane, and other Kubernetes components:

kubeadm works on multiple platforms

kubeadm deb/rpm packages and binaries are built for amd64, arm (32-bit), arm64, ppc64le, and s390x following the multi-platform proposal.

Multiplatform container images for the control plane and addons are also supported since v1.12.

Only some of the network providers offer solutions for all platforms. Please consult the list of network providers above or the documentation from each provider to figure out whether the provider supports your chosen platform.

Limitations

The cluster created here has a single control-plane node, with a single etcd database running on it. This means that if the control-plane node fails, your cluster may lose data and may need to be recreated from scratch.

Workarounds:

  • Regularly back up etcd. The etcd data directory configured by kubeadm is at /var/lib/etcd on the control-plane node.

  • Use multiple control-plane nodes by completing the HA setup instead.

Troubleshooting

If you are running into difficulties with kubeadm, please consult our troubleshooting docs.

Feedback